Hi, currently i am working on WIZ107SR module for data transmission from control panel to remote server system. I have configured the module as TCP/IP client and setting for serial and ethernet pakcet formation as follows

  • 9600 baudrate, no parity, and 1 stop bit
  • Serial to ethernet packet formation settings, the data size is zero and no time delay

the data is arrival as byte by byte on other side, not like as entire data.

So any one help, how do i get entire data sent from setial port on ethernet port, am i missing any settings.


Hi, kkdevara. I’m sorry to late answer.
If you want to receive entire data from WIZ107SR, Enable the ‘serial data packing conditions’ (timer, size or char.).
Please try to adjust this options refer to the datasheet.