W5500 on FPGA (Max10) - UDP Communication

W5500 on an FPGA (Max10) to control stepper-motors with LinuxCNC

verilog code is based on: GitHub - harout/concurrent-data-capture: Capture data from multiple ADCs concurrently using an FPGA. Stream the captured data out over ethernet + UDP. Tested on the Spartan 6 XC6SLX9, Wiznet W5500, and MCP3002 ADC.

my version in here: LinuxCNC-RIO/plugins/interface_w5500/interface_w5500.v at main · multigcs/LinuxCNC-RIO · GitHub