Hi,
Is it possible to read out the DNS ip address if you run the module in DHCP mode. The DNS ip address is received in a message from the DHCP server normally.
Thanks!
Hi jonas
Please refer to the below.
[code]at+nstat=?
MAC=00:08:dc:1c:d7:47
WSTATE=CONNECTED MODE=AP
BSSID=64:e5:99:b8:60:5a SSID=“wizohp” CHANNEL=2 SECURITY=WPA2-PERSONAL
RSSI=-54
IP addr=192.168.13.23 SubNet=255.255.0.0 Gateway=192.168.13.1
DNS1=168.126.63.1 DNS2=8.8.8.8
Rx Count=143839 Tx Count=11856932
[OK]
at+dnslookup=google.com
IP:173.194.38.67
[OK]
[/code]
