Hello, I am connecting the wizfi250 to an MCU through SPI and when those 2 are connected the wizfi continuously sends data to the MCU for a very long time, GPIO14 is 3.2v. It stops only when I connect the android device to wizfi. Any idea why? I have read in another topic tha in order to receive…

How wizfi250 sends data-SPI

wizdaniel November 11, 2015, 2:21am 5

Please refer to the following link that you have written.

Topic		Replies	Views
SPI-not receiving correctly WizFi250	0	406	October 21, 2015
SPI connections WizFi250	15	1141	October 18, 2015
SPI data transfer WizFi250	2	501	October 22, 2015
UART pin voltage WizFi250	7	698	August 13, 2015
Use SPI to comunicate between STM32 nucléo and WizFi250 WizFi250	4	1192	July 26, 2018