Connection to an ethernet module



I have just bought the wizfi630 and its evaluation board.
Could you please tell me how to configure the board so I can connect it to a module like this one?

Thanks in advance.




Hello Kino,

the configuration heavily depends on your network architecture. If there is no DHCP server running yet, please configure WIZFi630 as DHCP server and your TP-Link device as DHCP client. You can then follow the user’s guide provided by TP-Link for your device. I would also recommend to read the user’s guide of the WIZFi630 for available operation modes and configuration of wired and wireless networks.

If you have any more specific questions feel free to post here.

Best regards,