Hi, I am still operating my device in AP Client Multibridge Mode. The modules firmware is the new 1.1.29 and meanwhile, I have got the impression, that there is a problem with the order, serial commands are given to the module. I tested both, a variation of wait time during different commands for …

Problem with order of serial commands

kaizen March 31, 2014, 11:06pm 6

command is not necessary in order to connect your AP and WizFi630(AP-Client Mode).

For connecting WizFi630(AP-Client Mode) to your AP, there are two method.

First Method

Second Method

AP Client Multibridge Mode without AP function

Topic		Replies	Views
No reaction after serial SSID setting WizFi630	5	558	March 19, 2014
First contact to AP WizFi630	5	512	March 23, 2014
Error Message on System Status Request WizFi630	10	598	March 13, 2014
Serial Command Mode Crash WizFi630	3	858	October 10, 2014
WIZSmartScript & AT-Command problem WizFi630	1	628	December 3, 2013