Wiznet 750SR , Multiple ports with same IP address

[steveo]

Hello,
In my application I need to be able to connect to two UDP ports (52380 and 52381) with a single IP address (192.162.0.1). Is this possible?. The S2E Config tool only allows one local port . Do I need to modify the 750SR firmware, if so, can I get some help on what to modify?

Thanks in advamce

[bangbh]

Hi

@steveo

In my application I need to be able to connect to two UDP ports (52380 and 52381) with a single IP address (192.162.0.1). Is this possible?

It’s impossible, 750SR supports only one port. So you can’t connect to 2 UDP ports at the same time.

@steveo

Do I need to modify the 750SR firmware, if so, can I get some help on what to modify?

No, we can’t help you to change our firmware. If you want to use 2 channels at the same time, you can use WIZ752SR. Please refer to the link below.
http://wizwiki.net/wiki/doku.php/products:s2e_module:wiz752sr-12x:start

Thanks.