I’m currently trying to use the MACRAW with interrupts on the W6100 and it’s not receiving any interrupt signals when ICMPv6 packets are being broadcast on the local ethernet network. I using a modified version of the io6Library and have setup the system to use socket 0 and set it to use the Sn_MR_…

MACRAW, ICMPv6 packets & interrupts

irina_kim September 9, 2020, 4:36am 2

Hi~

This is the answer for a situation similar to yours.
Please go to the link and check it.
https://forum.wiznet.io/t/topic/7538/4

Topic		Replies	Views
W5500 MACRAW mode and Interrupt Pin W5500	2	1416	July 7, 2018
Mac Filter doesn't appear to work in mac raw mode W6100	3	722	May 26, 2020
MAC layer doesn't seem to be adding SRC and DEST MAC addresses to payload in MACRAW mode W6100	1	494	July 24, 2020
MACRAW Application Note? W5500	8	3896	June 30, 2014
Trouble sending ICMP (but can receive ok and send UDP & TCP) W5500	1	504	June 18, 2014