WIZ107 and CTS signal


I would like to convert RS232 to Ethernet in my project. But I need to handle CTS signal flow, for example, receiving an UDP packet each time CTS goes high. Is it something possible with this chip ?

Thank you.

Best regards.


Hi Julien.

Sorry. WIZ107SR is no has your saying function.(When CTS high, Data receiving.)

But, We developed new module. It’s name WIZ750SR.
It module is WIZ107SR compatible. and using W7500P chip. W7500P has cortex-M0 performance.

refer to below link.

Thank you