Hi
There are two “mode select”- switch on the EV board.
Connected to “Serial Command Mode 1 and 2”.
What function do they have?
Hi
There are two “mode select”- switch on the EV board.
Connected to “Serial Command Mode 1 and 2”.
What function do they have?
Hello Hardix
These two pins are for transition mode between and .
WizFi630 can be switched from to using this pin.
And, these are related with → <serial port#1> → → → <Hnable: HW GPIO Used>.
Copyright © 2017 WIZnet Co., Ltd. All Rights Reserved.